<p>Sure-Grip Delrin Press fit pivot cups. Fit all DA-45 plates, Avenger series, Avanti Magnesium, Invader, XK-4. Delrin cup are more precise and more durable than standard PVC cups. <strong>Set of 2 cups(for one plate)</strong></p>

<p>Replacement Delrin pivot cups for Powerdyne Thrust V2(Larger pivot pin) plates. Outer circum 13.5mm; inner circum 10.5mm, Hights 14.7mm. Set of two(for one plate)</p>

<p>Riedell Pro Fit Toe Caps are the perfect combination of toe and lace protection to keep your skates looking like new no matter what surface you skate on. The Pro Fit Toe Cap is crafted from top-quality leather. The Pro Fit Toe Cap attaches at the toe stop, extends around the toe of the boot and finishes about half way up the laces. <strong>Sold in pairs</strong></p>

<p>Unlike single strap toe covers that sometimes slide from side to side, these Riedell toe caps have been designed to stay securely in place, protecting your boot under the most demanding use on any surface. Built from a rugged, one-piece construction and finished with actual eyelets that won't damage laces even when pulled very tight Provide the very best protection for your skate boot. <strong>Set of 2</strong></p>

<p>This is a replacement protective front bumper for your Bont Hybrid quad skates. Use a hair dryer to make the rubber warm and use super glue to attach it to the boot. The protective bumper comes as a set of two bumpers (left and right). </p>

<p>This Gel heel cushions will take away any shocks from your feet and legs. Your joints, ligaments, and bones will thank you. Sizes: Small 36-40; Medium 40-43; Large 43-47.</p>

<p>MYFIT Derby Techsole – upgrade your game. The MYFIT Derby Techsole has been designed for Roller Derby skates, but also Park Roller skates. The thin sole out of 3-D molded EVA material combines support and performance.</p>

<p>Radar Mini Wheel Bag. Fit 8 roller skate wheels + tool or bearings set. Easy access to the wheels.</p>

<p>Sure-Grip replacement insoles. These are the same contour insoles that come standard with your new skates. Ideal for those who want a little more padding or just looking to replace their warn out insoles.. <strong>Set of 2</strong></p>

<p>This is a replacement protective front bumper for your Bont Quadstar or Prostar quad skates. Use a hair dryer to make the rubber warm and use super glue to attach it to the boot. The protective bumper comes as a set of two bumpers (left and right).</p>

<p><span><span>Myfit 2mm Low Cut Footies can be worn with quad, inline, ice boots and/or cycling shoes as an alternative to socks, enhencing confort and boot feeling.</span> Sizes: Small:34-37; Medium 37-40; Large 40-43</span></p>

<p><span class="field_value is_big_string">The Chaya aluminum adapter is a tuning tool that helps you to turn your Chaya roller skate into a park skate. The adapter fits Chaya Shiva and Ophira plates and will fit the 2nd generation of Chaya Zena plates as well as SNEEKRSKATE plates. Chaya grind blocks can be easy assembled by a single screw to the adapter and off you go for your park skating session. </span></p>

<p>The MYFIT Powerarch 45 strap is made for Inline skates and roller skates which do not provide enough heel lock. Simply place the velcro strap around your boot and tighten the strap to the desired tightness in order to lock your foot down. Set of 2</p>

<p>Pivot Cups for Powerdyne Revenge and Rival Plates. <strong>Sold in pairs(for one plate)</strong></p>

<p>Keep your skates looking new with the leather Riedell Toe Guards. Thread the top of the toe guard with your laces around the bottom eyelets of your boot and loop the bottom through the toe stop bolt to prevent the front of your boot from getting scuffed up. <strong>Sold in pairs</strong></p>

<p>Replacement standard PVC pivot cups for Suregrip Robe &amp; Probe plates(the one who comes has standard on most Sure-Grip rollerskates). Size: Ouside diameter 14mm; Inside diameter 8mm; heights 17mm. <strong>Set of 2 cups(for one plate)</strong></p>

<p>Sure-Grip Delrin Press fit pivot cups. Fit all DA-45 plates, Avenger series, Avanti Magnesium, Invader, XK-4. Delrin cup are more precise and more durable than standard PVC cups. <strong>Set of 2 cups(for one plate)</strong></p>

<p>CIB Slide Blocks adjustement to fit Roll Line Blaster Plates. We widen the support bar holes so you can use the CIB Slide Blocks on Roll Line Blaster plates. Plates and slide blocks sold separatly.</p>

<p>Bones Bearings tool acts as both a bearing press and a puller as well. It works with 8mm bearing and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race so you wont dent your shields. Ball detent technology and small enough to fit in your pocket and make it your keychain.</p>

<p>Speed rings to fit on standar 8mm axles.</p> <p>Match with most trucks: Paris, randal, Caliber, Tracker, Independant, Seismic, Gullwing, gunmetal,...</p> <p>Set of 4 speed rings (For one truck)</p>

<p>Top Cushions for Roll Line Blaster and Killer plates. Set your plate to your weight by choosing to proper durometer matching your needs. Set of 4</p>

<p>Radar Mini Wheel Bag. Fit 8 roller skate wheels + tool or bearings set. Easy access to the wheels.</p>

<p>Bones® Speed Cream® is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones® to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon™ based lubricants in skate environments. Speed Cream R.F. makes your bearings faster and is very long lasting.</p>

<p>CIB(Chicks In Bowls) Slide Blocks come in four sizes and are compatible with popular plates. Best of all, they’re super easy to install without removing plates! Mounting hardware and 10°/20° adaptaters included</p>