<p><strong></strong>Barrel shape, the most stable shape of bushings commonly used for downhill and freeriding.</p> <p><strong>The tall barrel are specialy made to fit on Ronin trucks (Both models)</strong></p> <p>Set of two bushings (for one truck)</p>

<p>Riot Ronin plugged Barrel is simply unic as its combine a barrel bushing with a Riot Plug. Use it board side on your Ronin trucks. The plug fit along the kingpin, plugging the hanger's kingpin hole to mimic the use of a spherical bearing. Stable and fast turning feeling. <strong>Sold as a set of two</strong></p>

<p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>

<div>Riptide APS Kore Inserts. Used to replace Spherical bearings in trucks that use them in the hanger. Dimensions of the Kores are .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) high. Fit on: Bear Smokey, Buzzed Niko, Don’t Trip — ANY MODEL WITH SPHERICAL, Radikal — ANY MODEL WITH SPHERICAL, Rogue, Sk8kings 2X. <strong>Set of two kore inserts</strong></div>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>

<p>Set of four Bones busings. Color black. Feet most street skateboards trucks. Bones bushings meet the highest standings required, and are the choice of many pro skateboarders</p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. APS Formula. Set of 2 bushings with washers</span></span><strong></strong></p>

<p>Set of two Sabre cones bushings (for one trucks). Cones bushings are reactive and allow a maximum lean.</p>

<p>Venom Eliminator Bushings first generation. Super High Rebound Formula</p>

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed.</p> <p>Set of two (For one truck)</p>

<p>To keep the best feeling with your YOW Surfskate, we recommend to regulary change your Yow Spring. <strong>Pack of 3 springs+Nuts, <span style="color:#d0121a;">ONLY FITS YOW V4 SYSTEM. Spring size must be the same as the one from the purchased system. 4mm=Soft; 5mm=Hard</span></strong></p>

<p>Carver Spare Parts: Replacement bushings &amp; pivot cups for Carver C7/C2 Trucks. This is the exact same cushions as the on who set the original trucks. Front Truck(C7) 95A Barrel/cone; Rear Truck(C2) 89A Barrel/Cone</p>

<p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>

<p>Set of 2 Khiro Kingpins grade 8 with lock nuts</p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed.</p> <p>Set of two (For one truck)</p>

<p>Set of 2 High Rebound Venom Super Carve conical bushings, made for carving in mind</p>

<p>Riot Ronin plugged Barrel is simply unic as its combine a barrel bushing with a Riot Plug. Use it board side on your Ronin trucks. The plug fit along the kingpin, plugging the hanger's kingpin hole to mimic the use of a spherical bearing. Stable and fast turning feeling. <strong>Sold as a set of two</strong></p>

<p>Speed rings to fit on standar 8mm axles.</p> <p>Match with most trucks: Paris, randal, Caliber, Tracker, Independant, Seismic, Gullwing, gunmetal,...</p> <p>Set of 4 speed rings (For one truck)</p>

<p>Vicious griptape is made specifically for Freeride, downhill, and sliding longboarders. Each pack includes 4 pieces 10”x11” grip a sheet of stickers. Extra-coarse grit for maximum grip. Color: Black</p>

<p><strong></strong>Barrel shape, the most stable shape of bushings commonly used for downhill and freeriding.</p> <p><strong>The tall barrel are specialy made to fit on Ronin trucks (Both models)</strong></p> <p>Set of two bushings (for one truck)</p>

<p>Bushings cup washers. Set of two</p>