Venom Caliber Plug Barrels HPF Longboard Bushings

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

<p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>

<div>Riptide APS Kore Inserts. Used to replace Spherical bearings in trucks that use them in the hanger. Dimensions of the Kores are .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) high. Fit on: Bear Smokey, Buzzed Niko, Don’t Trip — ANY MODEL WITH SPHERICAL, Radikal — ANY MODEL WITH SPHERICAL, Rogue, Sk8kings 2X, Zealous Downhill slalom. <strong>Set of two kore inserts</strong></div>

<p>Spare spring for Carver C7 Truck. Sold singely</p>

<p>Venom Tall Keg HPF shape is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. Ideal for use on the board-side, especially if you want to go to a softer setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. <strong>Set of two</strong></p>

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Carver CX/C2 bushing set "Hard". This set is made of 2 pivot cups, 2 CX/C2 92A Top Cones, 2 CX/C2 92A Bottoms Barrels, 1 Flat Washer. This setting brings the most stability. Also fits Carver C5 trucks</p>

<p>Venom Plug Barrel/cone combo Bushings for Caliber Trucks(Also Fit Bear Grizzly Gen- &amp; Randal III) are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. Resulting in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing. Now available in 5 different durometers in Venom's classic HPF formula! 1 set= 2 bushings</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/HcQY55vIVbE" title="YouTube video player" frameborder="0"></iframe></p>

<p>Caliber Forty Four 10" (184mm) Satin Blue second generation. This best seller freeride and downhill longboard truck comes back with a batch of improvements making it stronger and more accurate. <strong>Sold as a single truck</strong></p>

<p>Designed for surf skate the Kneepad TSG Wavesk8 A delivers all the protection  this discipline of sliding sideways demands. Its pre-shaped design is constructed from a double-stitched durable tear-resistant nylon to withstand the abrasive tarmac slides while a replaceable, high definition cap covers a removable ACF knee pad with lateral padding on both sides and above the knee. The pad is kept in place with anti-slip liner and top and bottom 360° Velcro straps. A comfortable lining and non-slip cuffs and pre-shaped design add to the pads precision fit and comfort so riders can focus on their ride without worrying about getting hurt.</p>

<p>Venom Downhill Barrels HPF bushings. Set of Two bushings(For 1 truck)</p>

<p>Riptide Pivot Cups for Caliber II &amp; III trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cup.</strong></p>

<p>Arbor Highlands is built to grip hard in fast chicanes and maximize exit speed through drift corners. Square lips with a wide 60mm contact patch and extra soft 75A Apex formula urethane deliver strong stopping power and snappy hookups for holding your line through the most challenging corner combinations. . The Revolver core delivers maximum support for larger wheels and helps provide the high levels of grip, speed, and slide control needed for the most challenging terrain. <strong>Set of 4 Wheels</strong></p>

<p>Set of two skateboard's flat shock pads 1/8" (3mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide.</p> <p style="margin-bottom:0cm;">The foot stop helps you keeping your front foot in locked place while sliding or cornering.</p> <p style="margin-bottom:0cm;">Sold as one foot stop including a long bolt</p>