Carver C7 Spare Spring

<p>Juicer Bounce, Tighter package. Crafted for quick turning response and smooth edge-to-edge transitions, the Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding. Available in two duros: soft (35-85Kg) and medium (70-105Kg). Each pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/LjmM-NTEBMY" frameborder="0"></iframe></p>

<p>Riptide APS formula bushing for Waterborne Surfskate adapter (front). Let's adjust your Waterborne setting to perfectly dial to your weight and style. Durometers from 87.5A (Very soft) to 97.5A (Hard). Made in USA</p>

<div>Riptide APS Kore Inserts. Used to replace Spherical bearings in trucks that use them in the hanger. Dimensions of the Kores are .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) high. Fit on: Bear Smokey, Buzzed Niko, Don’t Trip — ANY MODEL WITH SPHERICAL, Radikal — ANY MODEL WITH SPHERICAL, Rogue, Sk8kings 2X. <strong>Set of two kore inserts</strong></div>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed. Set of two (For ine truck)</p>

<p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks (front &amp; Rear). Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Barrel 0.65" (16.5mm) height on the board side and Cone 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. To compage with the all cones setting, the barrel &amp; cone combo have less lean, but is more stable. <strong>Sold in sets of 2 (for one truck).</strong></p> <p></p>

<p>High-quality bushings designed by Riptide to perfect the tuning and performance of the Carver C7 surfskate front truck. Choose from a wide range of hardness levels, from 80A (Soft) to 97.5A (Very Hard). Cylinder shape board side (street height 0.5") and cone shape road side (Short Street height 0.4"). Offers a progressive, quiet, and comfortable ride. Made with APS (Animated Polymer Systems) formula, providing responsiveness without being overly aggressive. Also compatible with standard skateboard trucks (Independent, Venture, Mini Logo, Tensor, Thunder, etc.). <strong>Includes a set of 2 bushings + 1 small cup washer.</strong></p>

<p>Riptide Street Barrels Krank Formula bushings. Compatible with most skateboard trucks: Independent, Venture, Thunder, Tensor, Iron, etc. High-performance formula that enhances truck performance and allows for adjustment based on weight or style. Diameter 24.77mm x Height 12.7mm. <strong>Typically placed on the board-side. For road-side, we recommend using the Short Streets.</strong> The Krank formula has a lot of rebound, allowing the trucks to return to their initial position in record time. The Krank formula bushings adjusts its performance based on the applied clamping pressure. <strong>Sold in pairs (2 bushings) with cups.</strong></p>

<p>The Venom Eliminator HPF longboard bushings, with their relatively original shape, allow you to turn deeper, while being ultra stable in a straight line. The HPF compound (High Performance Formula), has a little less rebound than the SHR formula, and is more suitable for downhill and freeride practices. <strong>Pair of two bushings</strong></p>

<p>Bones® Speed Cream® is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones® to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon™ based lubricants in skate environments. Speed Cream R.F. makes your bearings faster and is very long lasting.</p>

<p>Replacement Link Set for Carver C7 Truck</p>

<p>This nose guards are very easy to set and will prevent nose/tail cracks. Set of 2 nose/tail guards. No tools, screws, or glue required. Would fits most longboards</p>

<p>Venom Tall Keg HPF shape is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. Ideal for use on the board-side, especially if you want to go to a softer setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. <strong>Set of two</strong></p>

<p>Set of eight Zealous built in spacers and speed rings bearings for standard 8mm axles trucks. Good value</p>

<p>Riptide Pivot Cups for Carver CX, CX.4/C2.4, &amp; C5 trucks (front &amp; rear truck). Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Carver C7 Replacement Thrust Bearing Set. Set includes: One 3/8" ID x 15/16" OD Top Thrust Bearing; Two 3/8" ID x 15/16" OD Top Thrust Washers; One 3/8" ID x 7/8" OD Top Washer; One 7/8" ID x 1 3/8" OD Bottom Thrust Bearing; Two 7/8" ID x 1 3/8" OD Bottom Thrust Washers; One 3/8-24 TPI x 1 ½" Long Pivot Bolt; One 3/8-24 TPI Nylock Nut</p>

<p>This universal pocket tool measures in at under 2½" in length, so it's easy to bring along on a session for on-the-fly adjusting. Made of tool grade stainless steel, it won't rust, break or wear out, guaranteed. The Allen key snaps on with a powerful neodymium magnet.</p>