Rayne Bamboo Wedge Rail Risers(Set of 4)

<p>Set of two skateboard's flat shock pads 1/4" (6mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>Yow skateboard riser pad 1". sold individualy</p>

<p>Set of two Angled riser Pads. 5° Wedge. 9,5mm to 14mm depth. 8 Holes. Soft duro</p>

<p>Khiro Angled Wedge Rail Risers are an asset for skaters that ‘Wedge’ their Trucks to get the desired angle and they are quick and easy to install. Produced out of a custom reinforced plastic that Khiro uses to produce it’s full line of ‘Hard Risers’ that skaters rely on. <strong>Set of two(for one truck)</strong></p>

<p>Set of two Flat hard flat risers pads. <span>Suits old and new-school mounting.</span></p> <p><span></span></p>

<p>Paris trucks co. 7° wedge pads. Fit the exact shape of the Paris V1, V2 &amp; V3 base plates. <strong>Set of two</strong></p>

<p>Riptide Tunnel Riser . The Tunnel Riser is designed for eSk8 applications when you want to route wires underneath the trucks for a clean installation on your electric skateboard.  They can also be used on conventional skateboards if you want to route a cable lock under the trucks to discourage theft!  Conform to fit the concave of the board, size 82.55mm x 57.16mm; heights 14mm(0.55"); Weught 36Grs. <strong>Sold individually with a set of 4 2" bolts and nuts</strong></p>

<p>Set of two Independent Flat hard flat risers pads.</p>

<p>Skateboard T- Tool. All in one tool to tune your skateboard. 9/16 inch kingpin socket; 1/2 inch axle nut socket; 3/8 inch hardware socket; Phillips screwdriver; Allen wrench</p>

<p>Arsenal Cast Trucks are designed to be as close to precision as the gravity casting process can provide. With extremely low tolerances and superior engineering, Cast Arsenals are the strongest and most comfortable cast truck on the market period.  They feature tall bushings, a bushing seat that complements the aggressive geometry and allows for ample lean and stability.</p>

<p>Jessup Roam Rough griptape for longboards. 10" width. Sold per 10cm sections with a minimum of 100cm. Jessup is a skateboard griptape leader for years. Grip is fexy, grippy, and easy to instal. When buying deck and griptape in the same time, we can stick the grip on the deck for you and for free. Just ask us on your order comment.</p>

<p>Jessup Black 10" Skateboard and Longboard griptape. Standard grip. Easy to instal. Sold per 10cm</p>

<p>Set of 2 Kingpins Allen heads with lock nuts</p>

<p>Looking to cut some serious turns and get your swerve on? Look no further! The Paris V3 150mm is your go-to carving truck. The narrow hanger allows for quicker turning and increased leverage compared to a wider truck. The 50° baseplate provides an excellent balance of stability and maneuverability. Perfect for smaller boards, smaller riders, and the deep carver in all of us.</p>

<p>Bolzen skateboard mounting hardware. Phillips flat head. 1"=&gt;Board without pads; 1.25"=&gt; Board with pads up to 1/4"; 1.75"=&gt; Board with pads up to 1/2"; 2" Board with wedged pads up to 8°; 2.5"=&gt; Board with wedged pads up to 15°; 3"=&gt; Board set with double wedged pads. <strong>Set of 8 bolts &amp; nuts</strong></p>

<p>Loaded Drop-Through shock pads prevent damage to the deck that may be caused by contact between the deck and the base plate. They also help reduce road vibrations for a smooth and quiet ride. Also handy for topmount setups as a lightweight shim for vibration damping and wedging adjustments. Includes 4 drop-through shock pads (enough for one complete skateboard).</p>