Angled Riser Pads 4°

<p>Khiro Angled Wedge Rail Risers are an asset for skaters that ‘Wedge’ their Trucks to get the desired angle and they are quick and easy to install. Produced out of a custom reinforced plastic that Khiro uses to produce it’s full line of ‘Hard Risers’ that skaters rely on. <strong>Set of two(for one truck)</strong></p>

<p>Rayne Bamboo Wedge rail risers. Set of 4(for 4 trucks)</p>

<p>Set of two Paris specific hard riser pads. 1/8" (=3mm) high. The perfect shape to fit Paris V1, V2, &amp; V3 Trucks</p>

<p>Riptide Tunnel Riser . The Tunnel Riser is designed for eSk8 applications when you want to route wires underneath the trucks for a clean installation on your electric skateboard.  They can also be used on conventional skateboards if you want to route a cable lock under the trucks to discourage theft!  Conform to fit the concave of the board, size 82.55mm x 57.16mm; heights 14mm(0.55"); Weught 36Grs. <strong>Sold individually with a set of 4 2" bolts and nuts</strong></p>

<p>Loaded Drop-Through shock pads prevent damage to the deck that may be caused by contact between the deck and the base plate. They also help reduce road vibrations for a smooth and quiet ride. Also handy for topmount setups as a lightweight shim for vibration damping and wedging adjustments. Includes 4 drop-through shock pads (enough for one complete skateboard).</p>

<p>Set of two skateboard's flat shock pads 1/8" (3mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>Set of two Independent Flat hard flat risers pads.</p>

<p>Set of two skateboard's flat shock pads 1/4" (6mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>Set of two Sabre cones bushings (for one trucks). Cones bushings are reactive and allow a maximum lean.</p>

<p>Orangatang Kegel is your ticket to high-speed steamroller action and the obliteration of a variety of small mammals. The large 80mm diameter generates high roll speeds while a moderate width of 56 mm allows for a versatile balance of traction and slide response.</p>

<p>Amphetamine Ceramix Silver. Zirconium oxide ceramic ball bearing, High precision tooling for less friction, Lighter and faster than steel ball bearings, Oil-free raceway provides longer running life. <strong>Set of height bearings+spacers</strong></p>

<p>Triple Eight’s RD wristguard was designed with a wider palm splint and snug fit body to withstand the rigors of derby. These wristguards come with uncompromising protection so you can whip around the track with confidence. Designed by roller derby girls for roller derby girls!</p>

<p>Enuff Shock pads for skateboard 1mm thick. <strong>Set of two</strong></p>

<p style="margin-bottom:0cm;">Set of eight skateboard mounting Bolts and nuts. Phillips Flathead. Sizes: 1"= 2,54cm; 1 1/8"= 2,85cm ; 1.1/4"=3,17cm ; 1.1/2"=3,81cm ; 2"=5,08cm</p>

<p>Jessup Black 11" Longboard griptape. Sold per 10cm</p>

<p>Jessup Pimp Neon green skateboard griptape. 9"x33" sheet</p>