Hovland Ram Hawk Snowskate - Complete

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. This sub-deck is 92cm long with a sintered base. It has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. <strong>Sub deck only</strong>. To build a complete snowskate from this sub deck, you will need to had trucks(compatible with Harfang), Top deck, and a leash.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland Buckshot Newspaper snowskate top deck. 7 ply maple and covered with EVA foam grip. "Wheelbases" placements are matching with the inserts of all Hovland sub decks (Buckshot, Bubba, Ram, Five-Oh). The pronounced kicks offer good stalling points for the feet while allowing you to ollie and place tricks. The kicktail is drilled to allow easy attachment of a leash.</p>

<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm (with included washers) for actual Harfang Trucks, or M6 x 25mm (without washers) for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>The Landyachtz Hammer Foam Grip Tape makes your board even more comfortable! A layer of soft foam is underneath the gritty top layer adds comfy to your longboard ride. This grip pack can also be used to make awesome 3D concaves! Add the grip first, then apply a Vicious or other super sticky grip to it to create a raised effect that'll help lock in feet. <strong>2 sheets 11"x11"</strong></p>

<p>Hovland wider flatdeck snowskate at 9.5". The Club<strong> Flatdeck</strong> is great for big tricks in parks or on the snowy streets. Size 9.55" x 36.5"; Blended radial nose &amp; tail for pop, feel &amp; speed; Deck fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes the board incredibly light and strong; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/WuNXC5R6IfY?si=Rn9ZcwDlF-pUsedS" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>

<p>Nylon shoulder washers to be used to rebuilt your Harfang snowskate Claw trucks. <strong>Set of 4 (for 2 trucks)</strong></p>

<p>Leash Hoveland Surf style col with a carabiner so you can esealy link the leash to your belt. The leash is an essential safety accessoriy allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone.</p>