Harfang Trucks 3.5" Adapter Plates(Set)

<p><span>The LY (Aka Landyachtz) Snowskate 37" Topographic is the larger of the two Topographic models, with </span><span>37" x 9.5" top deck and the proven Damask 40" sub-deck, with multiple mounting options. Rise to the occasion and handle any obstacle in your path. Carve and slash through the trees or catch some air and see what's possible on snowskate. Top deck toped with foam tape. Set with Bear Trucks. Includes a swivelling coil leash.</span></p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/VOxRhmZwKDw" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Claw Snowskate trucks. Standard height. fiberglass reinforced plastic base plate, single pivot point technology, powder coated steel top part. Fit most snowskate sub-decks such as: Harfang, Hovland, Landyachtz, Boyd Hill... If you are looking for more leverage for freeriding and/or steeper hills, we would recommand to add an additional  1/2" riser pad. Made in Canada. <strong>Set of 2 Trucks with sub-deck mounting hardware(Top deck mounting hardware not included)</strong></p>

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>

<p>Harfang Dual-decks type allround snowskate with Native graphic. 7 Plys maple 35" x 9.375" top deck mounted on a 43"(109.5cm) twin tip sub deck width 15.3cm x 12.3cm x 15.3cm. This Harfang snowskate is easy to ride, no matter if you are a beginner or a pro. You will enjoy carving on the slopes, doing tricks at the park. The board is set with Harfang Claw trucks and come with a leash for your(and other surounndings users) safety. The top deck is covered with EVA foam. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/aolafAypEW0" title="YouTube video player" frameborder="0"></iframe></p>

<p>Snowskate Ambition Pro model Josh Oakes 8.5" x 32.5". 7-ply epoxy-infused maple deck. 7-groove CPE base that is both fast and scratch resistant. The Ambitions pro models are distinguished from the Team series by a full bottom graphic, and by an addition of concave integrated into the EVA foam grip on the top of the deck. Flat deck type snowskates allow you to do the same tricks as in skateboarding, and use the streets and snowy hills as a playground. Made in Canada</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/_5BeBFr3-y4" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Hovland Five-Oh Yeti bi-level Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The ski is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland mid-width flatdeck snowskate at 8.875". The <strong>Session Flatdeck</strong> is the perfect choice for a backyard session with the buds or lazy park day. Size 8.875" x 35"; Blended radial nose &amp; tail for pop, feel &amp; speed; Deck fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes the board incredibly light and strong; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p></p>

<p>Hoveland EVA Foam Grip for snowskates. 10" x 40" sheet.Self-adhesive backing.</p>

<p>Leash Hoveland Surf style col with a carabiner so you can esealy link the leash to your belt. The leash is an essential safety accessoriy allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone.</p>

<p>Harfang Claw-XT snowskate trucks(extended version of the Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...) <strong>Set of 2 trucks with Sub-ski hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>