Powerdyne Thrust Stopper Insert

<p>Bont Kingpin nut locking screws for Athena plates. Set of two(for one plate)</p>

<p>5/8" Stopper Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 washers(For both plates)</strong></p>

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include bolts 12 bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>Bushings cup washers. Set of two</p>

<p><span>Washers used on the pivot pin to help secure the pin from moving in and out. This is a necessary part when using a truck with an adjustable pivot pin such as Sure-Grip Avenger, Avanti Magnesium,... 4Pk</span></p>

<p>Powerdyne Kingpin for Thrust / Triton / DynaPro plates. Sold individualy</p>

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>This Roll Line toe stop screws will allow you to keep your stoppers in place on most Roll Line plates. <strong>Set of two srews</strong></p>

<p>Abec 7 Skateboard &amp; Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)</p>

<p>The Riedell Waxed Laces are designed with strength in mind. The wax coating protects the laces to help them last longer, while providing additional grip to make tightening your skates easier. Sold in pairs.</p>

<p>Gumball Toe Stops is the number one roller derby stopper. Made with all natural rubber and an aluminium stem(to reduce weight), Gumball toe stops have the perfect balance of grip and durability necessary for quick stops and fast starts. Diameter 46mm. 2 stem sizes: short=17mm; Long=30mm. Available in 75A(More grip) or 83A(Better wear properties for outdoor and park skaters)<strong>. Sold as a set</strong></p> <p></p>

<p>Love Poison grip but want more roll?... Say hello to Atom Poison Savan 59mmx38mmt! What could possibly make Atom's Poison, one of the top performing wheels in the industry, any better?... Our exciting NEW SAVANT core of course! <strong>Set of four wheels</strong></p>

<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>MYFIT Derby Techsole – upgrade your game. The MYFIT Derby Techsole has been designed for Roller Derby skates, but also Park Roller skates. The thin sole out of 3-D molded EVA material combines support and performance.</p>

<p>187<span> Derby Wrist is designed with skating in mind. Its exceptional features have been developed to keep the athlete well protected and less restricted. Experience the difference!</span></p>

<p>Bones Bearings tool acts as both a bearing press and a puller as well. It works with 8mm bearing and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race so you wont dent your shields. Ball detent technology and small enough to fit in your pocket and make it your keychain.</p>