Prism Tropicalia Sled 34" Longboard Complete

Ride like never before with the Caliber III Rakeless Longboard Truck! This is the raked version of the Caliber III which provides increased turn and a generally more lively feeling ride. Comes with a hanger of 158mm and  50° baseplate making it more lively and provides a sharper turning radius, ideal for cruising, carving and freestyle/dance. Best choice on narrow board or if you are looking for more turnability. Caliber III 50° are set with Venom Plug Barrel / Cone 90A HPF Bushing, and 96A Urethane pivot cups Sold singely

• Newly designed, widened hanger supports for increased strength. Specifically to prevent bending.
• 45° chamfer for weight reduction. Specifically to offset the weight increase from added hanger material.
• High strength SCM435 alloy steel kingpins eliminate unwanted kingpin movement.
• SCM435 alloy steel axles reduce the risk of bending or cracking.
• Upgraded 96A urethane pivot cups are longer lasting and eliminate pivot slop.
• Tried and true tombstone hanger design increases strength and rigidity over competitors.
• Venom 90A High Performance Formula Plug Barrel bushings, designed specifically for Caliber Trucks, eliminate unwanted hanger slop and HPF urethane provides a fast return to center.
• 158mm hangar for stability and easier slide initiation.
• Stamped steel, flat washers for less restriction and improved response.
• Truck degree is stamped on the bottom surface of the baseplate for easy identification.
• The 50° baseplate is the most lively feeling option in our line, it provides a sharper turning radius, ideal for cruising, carving and freestyle/dance.
• Raked hanger provides increased turn and a generally more lively feeling ride.
• Raked hangar can also be flipped upside down from the stock position. This will turn it into a negative rake truck, for more consistent turns, lower ride height, easier slide initiation and an overall more stable ride. Ideal for fast freeride, downhill and beginners.

Ride like never before with the Caliber III Raked Longboard Truck! This is the 5mm Raked version of the Caliber III which provides increased turn and generally more lively feeling ride. Comes with a narrower hanger of 158mm (9") and  44° baseplate making it more stable at speed for downhill & Freeriding. Caliber III 44° are set with Venom Plug Barrel / Barrel 90A HPF Bushing, and 96A Urethane pivot cups. Sold singely

• Newly designed, widened hanger supports for increased strength. Specifically to prevent bending.
• 45° chamfer for weight reduction. Specifically to offset the weight increase from added hanger material.
• High strength SCM435 alloy steel kingpins eliminate unwanted kingpin movement.
• SCM435 alloy steel axles reduce the risk of bending or cracking.
• Upgraded 96A urethane pivot cups are longer lasting and eliminate pivot slop.
• Tried and true tombstone hanger design increases strength and rigidity over competitors.
• Venom 90A High Performance Formula Plug Barrel bushings, designed specifically for Caliber Trucks, eliminate unwanted hanger slop and HPF urethane provides a fast return to center.
• 158mm hangar for stability and easier slide initiation.
• Stamped steel, flat washers for less restriction and improved response.
• Truck degree is stamped on the bottom surface of the baseplate for easy identification.
• The 44° baseplate with bushing shim provides the most stability in our line, making them ideal for downhill and fast freeride styles of riding.
• Removing the baseplate shim allows for the use of tall bushings. This gives the freedom to create more bushing combinations/options without changing truck geometry.
• Raked hanger provides increased turn and a generally more lively feeling ride.
• Raked hangar can also be flipped upside down from the stock position. This will turn it into a negative rake truck, for more consistent turns, lower ride height, easier slide initiation and an overall more stable ride. Ideal for fast freeride, downhill and beginners.

Zealous Bearings. Precision 8mm axle holes .409" built in spacers 1mm built in speedrings Green rubber seals to keep dirt and debris on the outside of the bearing. Lubed with Archoil Nanoceramic Grease

-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.

-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.

-Extremely low water washout

-Corrosion on the inside of the bearing is nearly eliminated

Set of eight bearings

Orangatang Kegel is your ticket to high-speed steamroller action and the obliteration of a variety of small mammals. The large 80mm diameter generates high roll speeds while a moderate width of 56 mm allows for a versatile balance of traction and slide response.

A cantilevered outer lip with a straight profile is pliable enough to hug the road for grip while also ensuring consistent performance as the wheel wears. The shorter inner lip features a subtle inward bevel for race-worthy traction and predictable drifts.

A fully-exposed 46mm core with a deep “valley”-shaped cross section reduces weight while providing good acceleration, lots of momentum, and crisp slides. This core uses the same high-strength, high-stiffness, and heat-resistant material we developed and use in the entire Orangatang product line.

The Kegel is poured in our Happy urethane formula. Tested and proven over the years in our 75mm In Heat and 70mm 4President race wheels, Happy thane has the ideal blend of grip, buttery slide consistency, and vibration damping for controllable and intuitive downhill performance.

80mm diameter | 56mm width | 56mm contact | 8.1 oz/wheel | offset bearing seat

Set of four wheels