<p>These mounting nuts keep your plates on your skates! It is very important to make sure these are all on your skates. size 10/32" compatible with standard mounting bolts. <strong>Pack of 8 self locking nuts</strong></p>

<p>5/8" Stopper Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 washers(For both plates)</strong></p>

<p>This Roll Line toe stop screws will allow you to keep your stoppers in place on most Roll Line plates. <strong>Set of two srews</strong></p>

<p>Kit for making Discoblox fit onto plates with tapered kingpins such as Powerdyne Reactor, Revenge and Rival.  Kit comes with 4 washers and 4 trimmed cushions in either 88a or 93a.</p>

<p>Speed rings to fit on standar 8mm axles.</p> <p>Match with most trucks: Paris, randal, Caliber, Tracker, Independant, Seismic, Gullwing, gunmetal,...</p> <p>Set of 4 speed rings (For one truck)</p>

<p>Roll Line Kingpin nut locking screws for Blaster/Killer/Variant plates. Set of two(for one plate)</p>

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include 12 phillips head bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>The Riedell Waxed Laces are designed with strength in mind. The wax coating protects the laces to help them last longer, while providing additional grip to make tightening your skates easier. Sold in pairs.</p>

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>Roll Line Bearings press is an easy, fast, and safe way to set or extract bearings in you roller or skateboard wheels. This press can be use with 7mm(627), 8mm(608), or 10mm bearings. Max size of the Wheel to set: 68mm</p>

<p>This Roll Line toe stop screws will allow you to keep your stoppers in place on most Roll Line plates. <strong>Set of two srews</strong></p>

<p>Bont Ignite Roller skate Mounting Hardware. Including 4 long bolts, 4 short bolts, 8 self locking nuts</p>

<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>TSG Skate BMX Injected Black helmet. Low fit, ABS shell, EPS inner, CE EN 1078 / CPSC certified. Light weight (420g)</p>

<p>Bionic 3 way tool. Functions: 15/16 inch for Toe Stop Adjustment(Roller skate), 9/16 inch Kingpin Adjustment(roller and skateboard), 1/2 inch Axle Nut Adjustment(Roller and skateboard)</p>