Bont Ignite Mounting Hardware

<p>Set of 4 replacement axles nuts &amp; 8 Speed rings for standard 8mm axles</p>

<p>This Pilot toe stop screws will allow you to keep your stoppers in place on Pilot Falcon plates. <strong>Set of two srews</strong></p>

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>Roller Quad Toestop bolts(Set). To be use with bell type stoppers. Diameter 5/16". <strong>Set of 2 bolts</strong></p>

<p>Roll Line Variant 13mm King Pin for Roll Line Blaster, Variant and Killer plates</p>

<p>Powerdyne Toe Stop Screws. Match with Powerdyne Falcon &amp; Revenge plates; Roll Line plates all models exept Mirage. Set of 2 screws</p>

<p>Bushings cup washers. Set of two</p>

<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>The Roller Derby 3.0 Kneepad features sewn PE caps and TSG unique double velcro closure straps. The double velcro closure on the top strap guarantees a secure fitand hold while eliminating snagging on players' clothing. A customisable bottom strap with concealed, quick-release buckle and open back butterfy then deliver perfect fit and size management.</p>

<p>Replace your S1 Lifer Helmet Sizing Liners with some fresh ones! The S1 Lifer Helmet Sizing Liners are replacement front and back pads for the S1 Lifer helmets.  These Liners are compatible with all Lifer Helmet Shells including our standard Lifer, Mini Lifer and Mega Lifer.</p>

<p>Speed rings to fit on standard 8mm axles. To be placed between the hanger and the inner bearing, / between the outter bearing and the axle nut. Match with most trucks. <strong>Set of 4<br /></strong></p>

<p>The particular shape of Roll-Line hockey toe stops ensures an extraordinary contact with the ground, giving you the maximum of grip and boost when pushing. <strong><span style="color:#d0121a;">Metric thread. Only fits European plates</span></strong>. Set of 2 stoppers.</p>

<p>The Riedell Waxed Laces are designed with strength in mind. The wax coating protects the laces to help them last longer, while providing additional grip to make tightening your skates easier. Sold in pairs.</p>

<p>7mm Metric self locking Axle Nuts for roller skates. <strong><span style="color:#d0121a;">Only fit European plates using 7mm metric thread axles.</span></strong> <strong>Set of 8</strong></p>