Roll Line Toe Stop Locking Screws(Set)

<p>Roller Quad Toestop bolts(Set). To be use with bell type stoppers. Diameter 5/16". <strong>Set of 2 bolts</strong></p>

<p>Roll Line Ajustement Kingpin nuts for Variant, Blaster, &amp; Killer plates. Set of two(for one plate)</p>

<p>Roll Line Bearing Spacers 7x9mm(4 Pk). Diameter 7mm, width 9mm. Those spacers are not standard and are <strong>specifics to Roll Line Wheels</strong> <strong>and 7mm axles</strong>. Set of 4 spacers(for 4 wheels)</p>

<p>Bushings cup washers. Set of two</p>

<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>Roll Line Variant 13mm King Pin for Roll Line Blaster, Variant and Killer plates</p>

<p>5/8" Stopper Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 washers(For both plates)</strong></p>

<p>Powerdyne King Pin for Reactor plates. Sold individualy</p>

<p>The particular shape of Roll-Line hockey toe stops ensures an extraordinary contact with the ground, giving you the maximum of grip and boost when pushing. <strong><span style="color:#d0121a;">Metric thread. Only fits European plates</span></strong>. Set of 2 stoppers.</p>

<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>Roll Line Bearing Spacers 7x9mm(4 Pk). Diameter 7mm, width 9mm. Those spacers are not standard and are <strong>specifics to Roll Line Wheels</strong> <strong>and 7mm axles</strong>. Set of 4 spacers(for 4 wheels)</p>

<p><span>Roll Line 11-17 Wrench. The 11 Wrench is required to adjust the 7mm wheels axles nuts. On the other side of the tool, the 17 wrench can be use to krank the Kingpin nut(the 3mm wrench is also required for this operation). Useful tool for the Roll Line plates range</span></p>

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>Colored replacement laces for your roller skate shoes. Variables sizes and colors to match your needs.</p>

<p>Roll Line Ajustement Kingpin nuts for Variant, Blaster, &amp; Killer plates. Set of two(for one plate)</p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Dry Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>