<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include 12 phillips head bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>Bushings cup washers. Set of two</p>

<p>Roll Line Variant 13mm King Pin for Roll Line Blaster, Variant and Killer plates</p>

<p>5/8" Stopper Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 washers(For both plates)</strong></p>

<p>Bont Ignite Roller skate Mounting Hardware. Including 4 long bolts, 4 short bolts, 8 self locking nuts</p>

<p><span class="field_value is_big_string">The Chaya aluminum adapter is a tuning tool that helps you to turn your Chaya roller skate into a park skate. The adapter fits Chaya Shiva and Ophira plates and will fit the 2nd generation of Chaya Zena plates as well as SNEEKRSKATE plates. Chaya grind blocks can be easy assembled by a single screw to the adapter and off you go for your park skating session. </span></p>

<p>Powerdyne Stopper Insert for Powerdyne Thrust plates. Thrust are the nylon plates who usually comes factory mounted on Riedell R3, Dart, She Devil, Vandal rollerskates. Sold individualy</p>

<p>This Sure-Grip toe stop screws will allow you to keep your stoppers in place on most Sure Grip plates. Only compatible with the following plates: Avanti, Avenger, Competitor, Cenury, Classic, Cyclone, Magnum, Invader. <strong>Set of two srews</strong></p>

<p>Need us to mount your plates on your boots? It is all fine, our specialists can to It for you How does it works? Buy your shoes and plates from our shop and add our "Roller skate mounting service" to your basquet. We will get back to you for validation of the plate placement on the boot. This service may takes 2 to 3 working day traitment.</p>

<p>Set of 4 kingpin nuts for Roll Line plates with Click Action Sytem: Killer(Steel &amp; Titanium), Mistral, Energy(Steel &amp; Titanium), Dance, Matrix(Steet &amp; Titanium), Evo, Raffaello, Ring, Saturno, Giotto, Spin Variant C</p>

<p>Bionic Super Stoppers for Roller Quads. Flat round 45mm running surface. Bouncy, durable, and non marking rubber. Set with a standard 30mm lock lenght. <strong>Sold as a pair</strong></p>

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>CIB Slide Blocks adjustement to fit Roll Line Blaster Plates. We widen the support bar holes so you can use the CIB Slide Blocks on Roll Line Blaster plates. <strong>ATTN: This a service, plates and slide blocks are sold separatly.</strong></p> <p><strong></strong></p>

<p>Suregrip Zero Nuts are the lightest after market axle nuts and are made for standard 8mm(1/2") axels. Zero Nuts are adding a colorful touch to your roller skates. They will also helps the long lasting of your bearings by protecting them from the dust. <strong>Pack of 8 Nuts</strong></p>

<p>MYFIT Derby Techsole – upgrade your game. The MYFIT Derby Techsole has been designed for Roller Derby skates, but also Park Roller skates. The thin sole out of 3-D molded EVA material combines support and performance.</p>

<p>CIB(Chicks In Bowls) Slide Blocks come in four sizes and are compatible with popular plates. Best of all, they’re super easy to install without removing plates! Mounting hardware and 10°/20° adaptaters included</p>