Hovland Leash

<p>The Hovland Five-Oh Yeti bi-level Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The ski is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Tall Claw-XT snowskate trucks(extended version of the Tall Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. The Tall height gives more leverage for carving and will let you ride on steeper hills. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...). <strong>Set of 2 trucks with Sub-ski mounting hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p> <p></p>

<p>Harfang Claw-XT snowskate trucks(extended version of the Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...) <strong>Set of 2 trucks with Sub-ski hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p>

<p>The Landyachtz Hammer Foam Grip Tape makes your board even more comfortable! A layer of soft foam is underneath the gritty top layer adds comfy to your longboard ride. This grip pack can also be used to make awesome 3D concaves! Add the grip first, then apply a Vicious or other super sticky grip to it to create a raised effect that'll help lock in feet. <strong>2 sheets 11"x11"</strong></p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Color: Clear.Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Hovland Five-Oh Yeti 35.5" x 9.5" snowskate top deck. 7 ply maple and covered with EVA foam grip. "Wheelbases" placements are matching with the inserts of all Hovland sub decks (Buckshot, Bubba, Ram, Five-Oh). The pronounced kicks offer good stalling points for the feet while allowing you to ollie and place tricks. The kicktail is drilled to allow easy attachment of a leash.</p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>The Ram Hawk Grahpics is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 7-ply 36.75" x 9.5" Top deck with high concave and steep kicks. This deck is covered with EVA Foam Grip. 105cm sub deck. The sub deck has a Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Trucks 2" high with 1/2" risers. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/J8oBgX6vVv8" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang EVA Foam Grip for snowskates. 10" x 37" sheet. Self-adhesive backing.</p>

<p>Hoveland EVA Foam Grip for snowskates. 10" x 40" sheet.Self-adhesive backing.</p>

<p>Santa Cruz "Screaming Hand" tee-shirt Sage Green. 100% cotton, 180gm jersey, regular fit, short sleeve t-shirt, with soft hand front print and woven label branding. Santa Cruz Skateboards Since 1973</p>

<p>Harfang aluminium 3.5" adapter plates. Will let you install Harfang trucks on any sub-ski using 3.5" hole pattern(Lib Tech). 1.625″ threaded holes and 3.5″ mounting holes. Included : 2 plates + mounting hardware (2 stainless steel M6x12 hexagonal head screw)</p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>