Harfang Claw-XT Snowskate Trucks (Set)

<p>Hovland mid-width flatdeck snowskate at 8.875". The <strong>Fancy Lad Flatdeck</strong> is the perfect choice for a backyard session with the buds or lazy park day. Size 8.875" x 35"; Blended radial nose &amp; tail for pop, feel &amp; speed; 7-ply hardrock Canadian maple construction; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/k0FLuG_Gouc" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland mid-width flatdeck snowskate at 8.875". The <strong>Session Flatdeck V2</strong> is the perfect choice for a backyard session with the buds or lazy park day. Size 8.875" x 35"; Blended radial nose &amp; tail for pop, feel &amp; speed; Deck fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes the board incredibly light and strong; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/WuNXC5R6IfY?si=Rn9ZcwDlF-pUsedS" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Claw Snowskate trucks. Standard height. fiberglass reinforced plastic base plate, single pivot point technology, powder coated steel top part. Fit most snowskate sub-decks such as: Harfang, Hovland, Landyachtz, Boyd Hill... If you are looking for more leverage for freeriding and/or steeper hills, we would recommand to add an additional  1/2" riser pad. Made in Canada. <strong>Set of 2 Trucks with sub-deck mounting hardware(Top deck mounting hardware not included)</strong></p>

<p>Hovland narrowest flatdeck snowskate at 8.5", City Slicker V2 is ideal for technical tricks and tight lines. Size 8.5" x 34.75"; Blended radial nose &amp; tail for pop, feel &amp; speed; Fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes them incredibly light and strong.; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/WuNXC5R6IfY?si=Rn9ZcwDlF-pUsedS" title="YouTube video player" frameborder="0"></iframe></p>

<p>Nylon shoulder washers to be used to rebuilt your Harfang snowskate Claw trucks. <strong>Set of 4 (for 2 trucks)</strong></p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. This sub-deck is 92cm long with a sintered base. It has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. <strong>Sub deck only</strong>. To build a complete snowskate from this sub deck, you will need to had trucks(compatible with Harfang), Top deck, and a leash.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm (with included washers) for actual Harfang Trucks, or M6 x 25mm (without washers) for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>